User's Manual

EMS Wireless

EMS Wireless EkoMini Manual

Commands:

MENU = Displays List of Commands

HELP = Displays List of Commands And Help Formatting

EVNT = Displays User Alarm Log

CONF = Displays Basic Configuration

RPRT = Displays Report Alarms Settings

KPAL = Displays KeepAlive settings

TEST REPORT # = Will log off user and attempt to page report # with alarm

cleared code.

Enter KADIAL to test the Keep Alive Number. Example (TEST REPORT

KADIAL)

SET:

KTIME = Keep Alive time, Answer and Dial. xx:xx (24 hr.format)

KACTV = Keep Alive Active? Yes or No

KTYPE = Keep Alive Type? Dial or Answer

KMESS = Keep Alive Message? Tone or Ascii

KRING = Keep Alive Rings to Answer. 0-99

KCODE = Keep Alive Transmission String. "xxxx" must be Numeric if Message =

tone.

KDIAL = Keep Alive Dial Out Number. xxxx (up to 20 digits)

KRTRY = Keep Alive Dial Retries Before Alarm. 0-99

RP # DIAL = Report (#=1,2,3) Dial out Number. 20 digits

RP # PINN = Report (#=1,2,3) Pin Number. 10 digits

RP # DLAY = Report (#=2,3) Dial Delay (minutes) from Previous Report. 0-999

RP ACTV = Report Active. Yes or No

RP TYPE = Reporting Unit Type? Name or Number(serial)

PW 1 = Password 1 change. 5 Characters or Numbers (supervisors PW)

PW 2 = Password 2 change. 5 Characters or Numbers

PW 3 = Password 3 change. 5 Characters or Numbers

UN = Unit Name Change. 10 Characters. Default is Serial Number

AR = Answer Rings. 0-999. Defaut = 0

TM = Time. format: 01:31:29 for 1:31 am or 13:31:29 for 1:31 pm

DT = Date. format: 01/10/99 for Jan 10, 99