User's Manual

IM 610179-1, Rev 02
08/25/06
Page 3
WARNING
WARNING calls attention to a procedure or practice, which if ignored, may result in damage to
the system or system component. Do not perform any procedure preceded by a WARNING
until described conditions are fully understood and met.
Warning -- For Your Safety
Disconnect all power before servicing the unit.
Install the product securely on a stable surface in a protected location where no one can step or
trip over the supply cord and where the supply cord will not be damaged.
Do not expose this device to rain or other moisture.
The input voltage range is 100 – 240 VAC, Single Phase, 50 – 60 Hz.
Use only a grounded electrical outlet when connecting the unit to a power source. If you do not
know whether the unit is grounded, consult a qualified electrician.
A readily accessible disconnect device that is suitably approved and rated shall be incorporated
into the field wiring.
If You Need Help
If you need additional copies of this manual, or have questions about system options, or need
help with installation and using of the system, please contact EMS Wireless' Customer Support
Department.
EMS Wireless
Customer Support Department
2850 Colonnades Court NW, Norcross, GA 30071
770.582.0555 x5310
Service
Only authorized service personnel will service any part of this product and only in accordance
with procedures outlined in this manual. If the product does not meet its warranted
specifications, or if a problem is encountered that requires service, notify EMS Wireless'
customer support department. Service will be rendered according to the EMS Wireless'
warranty and repair policy. The product shall not be returned without contacting EMS Wireless
and obtaining a return authorization number from the Customer Support department.
When returning a product for service, include the following information: Owner, Model Number,
Serial Number, Return Authorization Number (obtained in advance from EMS Wireless
Customer Support Department), service required and/ or a description of the problem
encountered.
Warranty and Repair Policy
The EMS Wireless Quality Plan includes product test and inspection operations to verify the
quality and reliability of our products.