User's Manual

EMS Wireless Operator’s Manual
EkoLink Plus Fiber Optic DAS
14
with one system. At Cellular 800 MHz, A + A’ + A” or B + B’ extended band
segments can be covered with one unit.
• The EkoLink Plus system will support up to four remotes per hub or two remotes
with the diversity receive option. Diversity receive is accomplished by processing
an additional receive signal (using a second receive antenna) at a particular
remote unit. This signal is sent via fiber optic cable back to the hub unit. This
allows for spatial or polarization diversity to be supported, similar to a BTS.
• Optionally, Wave Division Multiplexing (WDM) can be added to the system,
allowing for a single fiber optic cable from the hub to each remote, which handles
both uplink and downlink signals.
• An optional wireless or wireline modem can be equipped at the remotes and or at
the hub location. The modem allows for remote alarm and control of the units via
MUM software or a laptop computer.
More specific technical features can be found in the Technical Specifications and the
Technical Description sections of this Operator’s Manual.
Figure 1 shows a mechanical diagram of the Hub in the rack mount configuration.
Figure 2 shows the hub in the optional waterproof housing, and Figure 3 shows the
remote unit.