User's Manual

EMS Wireless Operator’s Manual

EkoLink Plus Fiber Optic DAS

7.0 Detailed Software Commands

7.1 General

The Channelizer Module is equipped with a status and control system, which allows

the monitoring and control of various parameters such as channel number, attenuation,

temperature, status of door, etc., either with a local serial port/computer connection or

via the MirrorCell Unit Manager (MUM). The communication interface between the

computer and the control module is set up as a self-explanatory menu for simple

manual control and monitoring. This way, the parameters can be easily read off of and

set up from the display.

Note: The Usernames and Passwords should be changed during installation.

7.2 Software Command Set

A complete list of the manual software commands is shown in Table 6 below.

Table 6: Manual Software Command List

Command Range Example Description

General Commands:

GET PASSWORD Displays current Username

and Password settings.

NEED UPDATES Can be used to retrieve

information from the MUM

RESTART Allows the unit to re-initiate

the automatic software set-

up sequence.

INIT232 Initializes both serial ports

of the Channelizer.

GET FAT Displays all attenuation and

allocation thereof.

STATUS Displays Status Screen.

STAT Displays Status Screen.

HANGUP Causes the RS232 port to

sent ATH to the modem.

LIST ALARMS List alarms and if they are