User's Manual

EMS Wireless Operator’s Manual
EkoLink Plus Fiber Optic DAS
38
heartbeat message either
transmitted or received.
ALRM RTRY 0 to 100 SET ALRM
RTRY 3
The number of time the unit
will attempt to retry to
report an alarm via modem.
ALRM INTV 0 to 999 SET ALRM INTV
10
Time between re-try
attempts in minutes.
PROTOCOL CDMA, GSM,
OTHER
SET
PROTOCOL
CDMA
Protocol setting for
repeater.
LZR RPRT ON or OFF SET LZR RPRT
OFF
Off temporarily disables
Laser Reporting, forcing the
laser on until user exits or
turns back on.
DLPOWER 20 to 38
(PEAK –1)
SET DLPOWER
37
Attemps to set Downlink
composite output power to
level (dBm). Only works
within usable attenuation.
DL ATTN 0 to 30 SET DL ATTN 2 Allows the user to directly
set the attenuation for the
Downlink. CAUTION: Use
the SET DLPOWER
command for correct
system functionality.
UL ATTN 0 to 30 Allows the user to directly
set the attenuation for the
Uplink. Use with
CAUTION.
DL FREQ 1 1920 – 1990 SET DL FREQ 1
1937.5
Center frequency of the
downlink filter.
UP FREQ 1 1800 – 1920 SET UL FREQ
1857.5
Center frequency of the
uplink filter.
REPORT OFF
LASER
MODEM
BOTH
SET REPORT
LASER
Determines how the remote
unit will report an alarm:
OFF = no report will be
sent.
LASER = Unit will ONLY
report to Hub unit via Laser
Pulses.
MODEM = Unit will ONLY
report to MUM using