Use and Care Manual

8431 Santa Monica Boulevard Los Angeles, CA 90069-4924 U.S.A
Tel: [phone] www.emser.com
Cleaning Metal Tile
Some of the most popular metal tiles you see on the market today are made from solid metal, coated metal
glazes, or cast from polymers that are fused with real metal particles. Due to the presence of actual metal,
careful attention must be paid when cleaning these unique surfaces. Stainless steel cleaners for appliances
tend to work well on stainless steel tiles as they are typically made from similar grades of steel. However, it is
important to note that not all metal tiles are made from stainless steel and as such a pH neutral cleaner or water
with a mild soap solution can be used. It is not recommended that any abrasive cleaners or scouring pads be
used to clean metal as it may scratch the surface and cause the tiles to oxidize. It is also important to keep the
tiles dry and away from heat as much as possible.
Be sure to follow grout manufacturer’s instructions on cleaning and sealing grout properly. Grout cleaners
containing bleach or ammonia may be harmful to the metal if not applied properly.
Standard Cleaning of Metal Products
For metal tiles, use the following instructions for general purpose cleaning:
1. Wipe loose dirt or grease from the surface. An untreated paper towel or cloth is recommended.
2. Wash the surface with a mild detergent, degreaser, or cleaning solution (do not use abrasive cleaners
or abrasive applicators).
3. Rinse the tile thoroughly with clean water if a detergent is used.
4. Drying with a clean cloth or paper towel is recommended to prevent water spots.
Cleaning Glass Tile
There are many cleaning solutions on the market today suitable for cleaning glass tile. In most cases a standard
glass or multi-surface cleaner applied with a cloth or paper towels will work well. Do not use any abrasive
cleaners or scouring pads to clean glass as they may scratch the surface.
Standard Cleaning of Glass Products
For glass tiles, use the following instructions for general purpose cleaning:
1. Wipe loose dirt or grease from the surface. An untreated paper towel or cloth is recommended.
2. Wash the surface with a mild detergent, degreaser, or glass cleaning solution (do not use abrasive
cleaners or abrasive applicators).
3. Rinse the tile thoroughly with clean water if a detergent is used.
4. Drying with a clean cloth or paper towel is recommended to increase the shine and to prevent water
spots or streaks.