User's Manual

Product user manual & operation description
EMV3000
Document number: 915-11135-01 Page 12 | 26
2 SAFETY INFORMATION
2.1 General safety
Observe the rules that follow to ensure general safety.
Remark: The information that follows is based on a wide range of hardware products. Part of this
information is product specific and might not be applicable to the product(s) outlined in
this manual.
◼ Observe good housekeeping in the area of the equipment during and after installation.
◼ When lifting a heavy object:
 Ensure that you can stand safely without slipping.
 Distribute the weight of the object to lift equally between your feet.
 Use a slow lifting force, never move suddenly or twist when you attempt to lift.
 Lift by standing or by pushing up with your leg muscles; this action removes the strain from the
muscles in your back. Do not attempt to lift any object that weights more than 16 kg or that you
think is too heavy for you.
◼ Do not perform any action that can cause hazards to others or that can make the installation unsafe.
◼ Before you start the installation, ensure that other service technicians and/or customer’s personnel
are not in a hazardous position.
◼ Place removed equipment and other parts in a safe place, away from all personnel, while you are
installing the product(s).
◼ Keep your tool case away from walk areas so that other people will not trip over it.
◼ Do not wear loose clothing that can be trapped in any moving parts of the equipment or work tools.
Ensure that your sleeves are fastened or rolled up above your elbows. Fasten long hair.
◼ Insert the end of your necktie or scarf inside clothing or fasten it with a nonconductive clip, about 8
cm from the end.
◼ Do not wear jewellery, chains, metal-frame eyeglasses, or metal fasteners for your clothing, because
metal objects are good electrical conductors.
◼ Wear safety glasses when you are hammering, drilling, soldering, cutting wire, attaching springs,
using solvents, or working in any other conditions that might be hazardous to your eyes.
◼ Reinstall all safety shields, guards, labels and ground wires after installation of the product(s).
◼ Fan louvers on the equipment help to prevent overheating of internal components. Do not obstruct
fan louvers or do not cover them with labels or stickers (if applicable).