User guide

Meetinghouse Audio/Video Distribution Hub User Guide rev 0.9a February 2013
16
 Slide the Input Select switch (under Aux In) to the right to select VGA In.
 Connect the projector to the VGA port in the chapel.
 Ensure the video signal is coming through properly.
o If using the Receiver:
 Slide the Input Select switch (under Aux In) to the left to select Composite In.
 Connect a projector or TV to the composite video jack found in the chapel or other
rooms in the meetinghouse.
 Ensure the video signal is coming through properly.
• Make sure that audio is coming through properly:
o Chapel: turn on the sound system.
o Other rooms: change the selector switch to chapel feed.
Note: it is possible to also use the Composite In and Audio In ports (under Aux In) to send other video and
audio content throughout the entire building. For example, you could connect a DVD player to these ports and
make that content available in the chapel, Relief Society room, etc.
How to get support
If your AVDH-1 or AVDH-2 is not functioning properly, you should first check with the company that installed
the unit (coordinate through your FM). Since they are familiar with the installation, they should be able to
assist with troubleshooting wiring issues, etc.
If you are still unable to resolve the issue, please contact the Global Service Center at [phone].