Operation Manual

11
Connected to Computer
System requirement
Only supports Windows 98 Second Edition (Win98 requires USB driver downloaded from
our web www.emtec-international.com), 2000(SP2), ME, XP(SP1), Vista. Other systems
are not supported. (Windows 98 is not supported)
- Pentium II 200MHz
- 64 MB RAM
- 500MB memory space
- CD-Rom drive
- USB 1.1 port or above (USB 2.0 is recommended)
Connected to computer via USB
The device can be connected to computer via USB plug directly or via USB cable as the
figure below:
Notes:
1) The device will lock the power pin when it enters USB mode (i.e. The device will be off
when it is unplugged from the PC.
2) Before unplugging the unit from PC, make sure that you have safely removed the device
on Windows desktop.