Specifications

3.8.2 AP Advanced

Parameter Description

Beacon Interval Beacon Interval that specifies the duration between beacon

packets (milliseconds). The range for the beacon period is

between 20-1000 milliseconds with a typical value of 100.

DTIM Period Determines the interval the Access Point will send its broadcast

traffic. Default value is 3 beacons.

Preamble Mode The preamble defines the length of the CRC block for

communication among the wireless network. There are two mode

including Long and Short. High network traffic areas should use

the shorter preamble type.

WMM Parameter QoS Enable – Enable this function to support WMM function.

Power Save (APSD) Enable – Enable this function to support

WMM Power Save.

Set Defaults

Set the setting values return to defaults.

Apply

Confirm the settings in the “Advanced“.