Home Multimedia Center Movie Cube K220 User’s Manual (Version 1.
Table of Contents 1. Introduction ......................................................................................................... 3 1.1 Preface ........................................................................................................ 3 1.2 Packing List ................................................................................................. 3 1.3 Caution ........................................................................................................ 4 1.
1. Introduction 1.1 Preface Dear Customer, Thank you very much for purchasing the product. In the digital era, this product is a great home entertainment partner. With the outstanding design, you can enjoy movies and music, and view photos of precious moments. It’s easy to use this product as a portable external storage device with its built-in HDD and high-speed USB 2.0. This player has the following functionality: Data Storage - supports 3.5” SATA HDD up to 1TB.
1.3 Caution This player’s design and manufacture has your safety in mind. In order to safely and effectively use this player, please read the following before usage. 1.3.1 Usage cautions User should not modify this player. If commercial hard disk is being used, the environmental temperature should be within +5 ~ +35 . 1.3.2 Power The player’s power voltage: DC 12V. When using this player, please connect the supplied AC adapter or AC adapter cable to the player’s power jack.
HDD format etc. Please backup your data. - It is suggested to do defragment after a long period of usage. - Regularly backup the data in the hard disk so that it can be recovered in the event of data corruption or loss. Our company takes no responsibility for loss of data stored on the hard disk. 1.3.7 Others When using this player, please do not let the player come into contact with water or other liquid, if water is accidentally spilled on the player, please use a dry cloth to absorb the spillage.
1.4 Connection 1.4.1 Connect to Computer (1) Make sure the player is powered on. (2) Plug in the squarish connector of the USB cable to this player’s USB DEVICE port. (3) Plug in the rectangular connector of the USB cable to computer. 1.4.2 USB Mass Storage Device (like USB Pen Drive, MP3, USB HDD etc.) Connection (1) Make sure the player is powered on. (2) Plug in the USB Pen Drive or USB HDD etc. to the USB host port of this player. 1.4.
(2) Insert the card by following the arrow pointer in the picture. 1.4.4 TV connection 1.4.4.1 A/V OUT (1) Follow the picture and plug in the 3 color connector to the player’s A/V OUT jack. (2) Follow the picture and plug in the 3 color connector to the TV’s A/V IN jack. In this way, you can enjoy the content in the player on TV or other display devices. In this way, you can also enjoy videos, music, and photos in the player on TV. 1.4.4.
In this way, you can have the highest quality video and audio via a single cable. 1.4.5 Digital Audio Device connection (1) Follow the picture and plug in the Toslink connector of your coaxial cable to the player’s S/PDIF Coaxial jack. Or if you use optical fiber, please plug in the Toslink connector of your optical fiber to the player’s S/PDIF Optical jack (not supplied). (2) Follow the picture and plug in the other connector on your optical fiber to the digital audio device (not supplied). 1.4.
1.5 First Time Usage 1. Power on After connecting to power, the POWER button indicator on the front panel will turn on (red light). Press the POWER button to power on the player, then the indicator light will turn blue. 2. Power off In playback and other interface, press the POWER button to turn off the player, when power off the player will prompt you that the system is being shut down. After the system is shut down, the indicator light of the POWER button on the front panel will turn red. 3.
2. About the Player 2.1 Remote Control All procedures in this manual can be carried out using the remote control buttons. See the following for details on each button and its function: 1. POWER 2. HOME 3. TV SYS 4. DVD 5. SUBTITLE 6. OPTION 7. ZOOM 8. PREV 9. UP 10. LEFT 11. OK 12. VOL- 13. DOWN 14. MOVIE 15. MUSIC 16. PLAY/PAUSE 17. STOP 18. SETUP 19. MUTE 20. REPEAT 21. AUDIO 22. SLIDE 23. RETURN 24. NEXT 25. RIGHT 26. VOL+ 27. PHOTO 28. FR 29. FF No.
19 20 21 22 23 24 MUTE REPEAT AUDIO SLIDE RETURN NEXT 25 RIGHT 26 27 28 29 VOL+ PHOTO FR FF Press this button to turn on/off mute function Setup the repeat mode. Switch audio channels. Select to set photo+music slide show Press to go back to the previous screen when navigating menus. In file list mode, press this button to move to the next file list. In playback mode, press this button to playback the next media file Move cursor to the right. Rotate the photo.
2.2 Front Panel 1. POWER button 2. REC indicator 2.3 Rear Panel 1. DC IN jack 2. HDMI jack 3. S/PDIF OPTICAL jack 4. S/PDIF COAXIAL jack 5. A/V OUT jack 2.4 Side Panel 1. USB DEVICE port (B-Type) 2. USB HOST port (A-Type) 3.
3. Functions 3.1 Main Interface In the main interface, by default the cursor will stay on the photo function, when the cursor points to another function, the name of that function will be displayed. The main interface contains: PHOTO, MUSIC, MOVIE, BROWSER, DEVICE and SETUP. 3.2 Movie Playback Enter movie interface, only supported video files and folders will be displayed. This player supports DAT, VOB, AVI and MPG video files.
Subtitle: Press to turn on/off the subtitle. OPTION: Press to open tool bar. STOP: Press to stop the playback and return to the video interface. 3.3 Photo Playback Enter photo interface, only supported image files and folder will be displayed. This player only supports JPEG files. Select an image file to open the file. You can set the slideshow mode in the Setup menu. Direction Button: Press UP/DOWN/LEFT/RIGHT button to move the image. ZOOM: Press this button to activate the zoom mode.
Select an audio file to start playback. You can access the following functions during playback: PLAY/PAUSE: Press this button to play/pause the playback FR/FF: Press to fast reverse/fast forward the current playback. Press repeatedly to select speeds(2x/4x/6x/8x/16x/32x) REPEAT: Select to choose between TRACK, FOLDER and ALL. STOP: Press to stop the playback and return to the audio interface OPTION: Press to open tool bar. 3.
OPTION: Press to activate/hide the tool bar during playback. PREV/NEXT: Press to go to previous/next chapter. STOP: Press to stop the playback. You can switch the audio languages, subtitle, etc… thanks to the buttons in the tool bar. Note: The VIDEO_TS and AUDIO_TS directories must be copied together to one same folder on the HDD. 3.6 Storage device In the main interface, enter Device interface to enter storage device interface.
OSD language To select and change the system language. It supports English, French, German, Italian, Spanish, etc. Encoding Select to set text encoding. Slide time Select to set the interval time of photo slide show: 5S, 10S, or 15S. Slide mode Select to set the transitional effect of photo slide show. Defaults Restore the unit to factory settings. 3.7.2 Display setup Select Display Setup and you can setup TV standard, display type contrast and HDMI resolution.
Interval time 5 Sec, 10 Sec, 15 Sec, 30 Sec, 1 Min, 3 Min, Off Transition effect Select to set the transition effect for photo slide show. Show type Fit Screen, Full Screen Color tone Normal, Black & White, Classic Browse Thumbnail, File Manager 3.7.4 Custom setup Select Custom setup and you can setup digital audio mode, slide show mode, firmware version and default.
Photo ON, OFF Music ON, OFF Movie ON, OFF 4. Upgrading the Firmware The firmware is the operating system (OS) installed on the device. Firmware upgrades can bring new features, improvements and bug fixes. Download the latest firmware from our official website. Step 1: Prepare the Memory Card You will need a Memory Card for firmware upgrade. Make sure there is no file in the Memory Card. Copy the file "UPG956M.AP" to the root directory of a Memory Card. No change the file name.
5. Appendixes 5.1 Specifications Technical Specifications Format: AVI, VOB, MPG,DAT, MP4, TS Video Codec: MPEG-1, MPEG-2 Resolution: Up to 720x576 (PAL), 720x480 (NTSC) Subtitle: SRT, SSA, SMI Format: MP3, WMA, OGG (DRM, Pro and Advanced Profile not supported) Audio Codec: MP2, MP3, PCM, LPCM Compression rate: MP3: 32 Kbps~320 Kbps; WMA: 32 Kbps~192 Kbps Photo A/V Output TV System USB Interface JPG/JPEG, BMP (720p/1080i) Slide Show and zoom support Video: Composite, Component, HDM I (Version 1.
5.2 Frequently Asked Questions Question 1. My computer does not recognize my player. Answer: (1) Make sure the player is powered on. If it is off, the computer will not be able to find the player. (2) Make sure the player is connected to computer. (Refer to 1.4.1 for connecting player to computer). (3) When using Windows 98SE, install the USB driver first. After installation, restart the computer. Then reconnect the player to the computer. (Refer to 1.4.1 for connecting player to computer).
filtered views such as Photos, Music, or Movies. Question 6. Why do some supported photo formats, can not be shown in the photo function? Answer: In the JPEG format there are different modes. The player doesn’t support all the modes. So you have to change your photo format first as follow: (1) Use Photoshop to open the photo. (2) Choose ”File” then “save as” from the menu, as the picture on the left hand side shows, select the picture format as JPEG, input the file name and click the “save” icon.
- Acts of nature, such as fire, static discharge. - Damage from unauthorized repair, alteration or accident. - Damage from misuse or neglect. - A unit that has been modified or incorporated into other products or is used for institutional or other commercial purposes. - Loss of customer’s software, firmware, information, or memory data. - Improper handling or installation. For complete information regarding EMTEC Movie Cube warranty and customer support please visit our website: www.emtec-international.
this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on
the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11.