Manualshelf

User`s manual

ManualsBrandsEmtec Manualsaudio & home theatreMovie Cube Q800 WiFi, 1000GB
63646566676869707172
Question 7. During power on, why does the TV will have a short flashing, blue
screen or screensaver?
Answer:
This is normal, when the system initializes, it will setup the corresponding parameters so it
can output the correct video signal to the TV, during the initializing time, the TV will receive
incorrect signals or the signals will not be stable and will cause the TV screen to flash, some
TV’s will treat this as no signal, and will display a blue screen or screensaver.
Question 8. Why when I switch to Y/Pb/Pr 480P, 576P, 720P, 1080I, does the
TV screen display an unwatchable picture?
Answer:
Please check if your TV supports Y/Pb/Pr 480P, 576P, 720P, 1080I output, if your TV does
not support, please use the A/V signal display instead, press the TV SYSYEM button on the
remote control, then switch the TV’s video input to NTSC or PAL.
Question 9. Why is there no sound on movie or music playback when using
Y/Pb/Pr component output?
Answer:
Y/Pb/Pr output is a video output only, and does not include sound signals, when using
Y/Pb/Pr output, please plug the A/V OUT or the S/PDIF jack to output sound.
Question10. Why couldn’t the player find the hard disc?
Answer:
Make sure the firmware is installed correctly, and no system partitions on the HDD were
deleted. If hard disc failure occurs, please backup your data and reinstall the firmware.
Question11. Some functions like recording, time shift etc. do not work. What
should I do?
Answer:
If you find some functions do not work properly on the player, please change system settings
to the default (Refer to 6.6 for changing system settings).
Question12. While playing movies in the multimedia partition, buttons like
PREV, NEXT, A-B, etc. sometimes could not be used.
Answer:
The above functions are designed for recorded video titles and IFO (DVD) files only.
Question 13 : What partitions are available on the hard disc?
Answer:
UDF is the partition allocated for the recording of your videos and timeshift fucntion.
FAT 32 is the main partition on which you can copy any data directly through the
network or from another USB device (mass storage).
NTFS is the partition on which you can copy any data directly when Movie Cube is
connected from USB to your PC (only). It's generally used for files larger than 4GB.
71 / 72