Specifications

EN
7
1.3.3 Radio interference/compatibility
• If not properly shielded, almost all electronic devices will get radio interference. Under some conditions, your player might
get interference.
• The design of this player has followed the FCC/CE standard, and has followed the following rules:
1. This player may not cause harmful interference;
2. This player could accept some interference received including interference that may cause undesired operation.
1.3.4 Repair
If the player has a problem, you should take it to an appointed repair center and let the specialists do the repair, never repair the
player yourself, you might damage the player or endanger yourself or your data.
1.3.5 Disposing of the player
When you dispose of the player, be sure to dispose it appropriately. Some countries may regulate disposal of electrical device,
please consult with your local authority.
1.3.6 Hard disk cautions
The player uses an internal hard disk for data storage, in normal case, format or repair is not required.
You should carefully read the < Frequently Asked Questions > chapter, and check our website for latest information before
formatting the hard disk.
• Physical impact may create bad sector in the hard disk, you can use CHKDSK to x the problem.
• All data stored in the player may be lost due to physical impact, electrical shock, power lost, HDD format etc. Please
backup your data.
• It is suggested to do defragment after a long period of usage.
• Regularly backup the data in the hard disk so that it can be recovered in the event of data corruption or loss. Our company
takes no responsibility for loss of data stored on the hard disk.
1.3.7 Others
When using this player, please do not let the player come into contact with water or other liquid, if water is accidentally spilled
on the player, please use a dry cloth to absorb the spillage.
Electronic products are vulnerable, when using please avoid shaking or hitting the player, and do not press the buttons too
hard.
Do not let the player come into contact with water or other liquid.
Do not disassemble the player, repair the player or change the design of the player, any damage done will not be included in
the repair policy.
Do not press the buttons of the player too hard.
Avoid hitting the player with hard object, avoid shaking the player, and stay away from magnetic elds.
During electrostatic discharge and the strong electromagnetic eld, the product will malfunction, then unplug the power cable
and the product will return to normal performance next time it is powered on.
During use, do not look directly at the projector lens, strong light beam may damage your eyes.
Do not block heat dissipation holes.
Do not use hands to touch or wipe the projector lens .
During use, please at machine.
Do not use lens cap when projector is in operation.
Do not install near any hot source.
Only use accessories specied by the manufacturer.