Specifications
EN
10
1.4.6 Power connection
(1) Follow the picture and connect the AC adaptor to the player’s DC IN jack;
(2) Follow the picture and plug in the AC adaptor to the power outlet.
1.4.7 *ANT connection (For T750/T800/T800x)
Follow the picture and plug a TV Aerial to the ANT. / RF IN socket.
1.5 First Time Usage
1. Power on
Remove the lens cap. After connect to power, the indicator of the POWER button on the front panel will turn on(red light), press
the POWER button will power on the player; During power on, the indicator light will ash a blue light, after the player is power
on, the indictor will turn on the blue light.
2. Power o
In playback and other interface, press the POWER button to turn o the player, when power o the player will prompt you that the
system is being shut down. After the system is shut down, the indicator light of the POWER button on the top panel will turn red.
3. Language control
The system language of this player can be set to English or other languages. In setup interface, the selected language will take
eect immediately.
4. Adjusting the projected image
The projector is equipped with elevator feet for adjust ing the image height.Change the distance for adjusting the image to small
or to large. Flat the machine to make sure the image isn’t slanted, then turn the focus ring until you see a clear image.