Home Multimedia Center Movie Cube N120 User’s Manual (Version 1.0.
Table of Contents 1. Introduction .......................................................................................................................... 3 1.1 Preface............................................................................................................... 3 1.2 Packing List ...................................................................................................... 3 1.3 Caution .............................................................................................
1. Introduction 1.1 Preface Dear Customer, Thank you very much for purchasing the product. In the digital era, this product is a great home entertainment partner. With the outstanding design, you can enjoy movies and music, and view photos of precious moments. This product can directly playback files from U disk and portable HDD with its high-speed USB 2.0. It also can recognize files which stored on memory card.
1.3.1 Usage cautions User should not modify this player. The environmental temperature should be within +5℃ ~ +35℃. 1.3.2 Power The player’s power voltage: DC 5V. When using this player, please connect the supplied AC adapter or AC adapter cable to the player’s power jack. When placing the adapter cable, make sure it can not get damaged or be subject to pressure. To reduce the risk of electric shock, unplug the adapter first before cleaning it.
1.4 Connection 1.4.1 USB Mass Storage Device (like USB Pen Drive, MP3, USB HDD, etc.) Connection (1) Make sure the player is powered on; (2) Plug in the USB Pen Drive or USB HDD or other USB device to the USB HOST port of this player. 1.4.2 Memory card connection Memory card can be used by inserting to the card slot. (1) Make sure the player is powered on; (2) Insert your memory card (SD/MMC/MS) to the card slot of this player properly.
1.4.3 TV connection 1.4.3.1 A/V OUT (1) Follow the picture and plug in the connector to the player’s A/V OUT jack; (2) Follow the picture and plug in the 3 color connector to the TV’s A/V IN jack. (3) Select the appropriate input source. In this way, you can enjoy the content in the player on TV or other display devices. 1.4.3.
1.5 First Time Usage 1. Power on Plug in the power cord to DC IN jack on the player, and the POWER indicator on the front panel will turn blue. 2. Power off In playback and other interface, press the POWER button on the remote control, the player will enter standby mode, and the POWER indicator will turn red. 3. Language control The system language of this player can be set to English or other languages. In setup menu, the selected language will take effect immediately.
2. About the Player 2.1 Remote Control All procedures in this manual can be carried out using the remote control. See the following for details on each button and its function: 1. POWER 2. HOME 3. OPTION 4. VOL + 5. UP 6. LEFT 7. PLAY / PAUSE 8. VOL 9. DOWN 10.PHOTO 11. STOP 12. TV SYS. 13. PREV 14. RIGHT 15. NEXT 16. RETURN 17. MUTE No. Button Function 1 POWER Press to power off or enter the standby mode. 2 HOME Press to return to the main interface.
10 PHOTO Press to activate photo slideshow with background music. 11 STOP Press to stop playback. 12 TV SYS. Press to switch video output modes. 13 PREV Press to go to previous chapter / file, or page up on list. 15 NEXT Press to go to next chapter / file, or page down on list. 14 RIGHT Press to move the highlight right when navigating menus; Press to enable the buttons in tool bar while in file list mode. 16 RETURN Press to go back to upper directory.
2.4 Side Panel 1. Card slot 2.
3. Setup Menu The Setup Menu allows you to configure video, audio, photo and system settings. Select Setup icon in the main interface to enter this Menu. 3.1 General Setup This section allows you to setup OSD Language and other system settings. OSD Language To select and change the system language. File Sorting To select and change the file sorting method. The sorting method contains: A to Z, Z to A, Recent date, Oldest date. Auto Start You can turn Auto Start on/off.
3.2 Video Setup This section allows you to configure the video settings. TV Type To set the TV system Resolution To set the video output mode: 480i/576i, 480p/576p, 720p, 1080i Divx Subtitle You can turn subtitle on/off Subtitle Color You can select the color of the subtitle, Subtitle Backgroud You can select the color of the subtitle background Main Page Back to the main setup menu. 3.3 Audio Setup This section allows you to configure the audio settings.
3.4 Photo Setup This section allows you to configure the photo settings. Interval Time To set the interval time of photo slide show: 1S, 3S, 5S, or 10S. Transition Mode To set the transition effect of photo slide show. Main Page Back to the main setup menu. 3.5 Firmware Version This section displays the firmware version.
4. Media Playback Main Interface In the main interface, use the direction keys to select and enter different mode. The main interface contains: Setup, Device, Photo, Music, Video, and File. Select the device Select the Device icon on the main interface to enter this menu, then you can select the device or partition you wish to browse. 4.1 Video List Select the Video icon in the main interface to enter this menu, and all of the supported video files stored in the device will be displayed.
Press the UP / DOWN button to select a video file you wish to play, and press the PLAY / PAUSE button to begin the playback. You can access the following functions during playback: OPTION: PREV/NEXT: STOP: Press to activate/hide the tool bar during playback. Press to go to previous/next file. Press to stop the playback. 4.2 Music List Select the Music icon on the main interface to enter this menu, and all of the supported audio files stored on the device will be displayed.
Press the UP / DOWN button to select a music track you wish to play. In music list, press the LEFT button to enable the buttons in the tool bar. 4.3 Photo List Select the Photo icon on the main interface to enter this menu, and all of the supported pictures stored on the device will be displayed. Press the UP / DOWN button to select a photo you wish to browse, and press the PLAY / PAUSE button to begin the playback.
You can access the following functions during playback: OPTION: PREV/NEXT: STOP: Press to activate/hide the tool bar during playback. Press to go to previous/next file. Press to stop the playback. 4.4 Slide Show In photo list or music list, press PHOTO button in the remote control, or press the slideshow button in the tool bar to activate the photo slide show with background music. 4.
Press the navigational buttons to select options while navigating the DVD root menu. You can access the following functions during playback: HOME: OPTION: PREV/NEXT: STOP: Press to return to the root menu during playback. Press to activate/hide the tool bar during playback. Press to go to previous/next chapter. Press to stop the playback. With the buttons in the tool bar, you can switch the audio languages, subtitle, etc.
5. Upgrading the Firmware The firmware is the operating system (OS) installed on the device. Firmware upgrades can bring new features, improvements and bug fixes. Download the latest firmware from our official website. The following shows the necessary steps for upgrading the firmware. 1. Power on the player. 2. The file used for upgrade is named: bank30.rom. Copy it to the root directory of a USB Pen Drive. 3. Plug the USB Pen Drive into one of the USB HOST ports of the player.
6. Appendixes 6.1 Specifications Format: AVI, VOB, MPG, MP4, DAT Video Codec: MPEG-1, MPEG-2, MPEG-4 ASP Resolution: Up to 720x576 (PAL), 720x480 (NTSC) Subtitle: SRT, SSA, SMI, SUB Format: MP3, WMA (DRM, Pro and Advanced Profile not supported) Audio Codec: MP2, MP3, PCM, LPCM Compression rate: MP3: 32 Kbps~320 Kbps; WMA: 32 Kbps~192 Kbps Photo A/V Output JPG/JPEG (720p/1080i) Slide Show support Video: Composite, Component, HDM I (Version 1.
Question 4. How can I format a portable HDD (above 32 GB) into a FAT32 partition? Answer: Windows 2000/XP can view a FAT32 partition within the capacity of more than 32GB, but the format tool in Windows 2000/XP can only format FAT32 partition within the capacity of 32GB. If you need to format any FAT32 partition beyond the capacity of 32GB, please use other third party format tools, like Norton Partition Magic 8.0®. 6.3 Copyrights and Trademarks Copyrights All rights reserved.
