Instruction Manual

BLU-CC1A & CC2A/SV5 BLU-CC1B & CC2B/SV6

1. Power Button (IN5) 1. Volume (IN6)

2. Volume (IN7) 2. Volume (IN8)

3. Ref 3. Ref

4. N/A 4. N/A

5. VCC 5. N/A (CC1B) or VCC (CC2B/SV6)

6. LED (OUT3) 6. LED (OUT4)

7. GND 7. N/A

8. GND 8. N/A

BLU-SV2 & SV4

BLU-SV7

1. SRC (IN10) 1. SRC (IN11)

2. Volume (IN9) 2. Volume (IN12)

3. Ref 3. Ref

4. N/A 4. N/A

5. VCC 5. VCC

6. N/A 6. N/A

7. GND 7. GND

8. GND 8. GND

A remote control can be used for controlling the volume of the various

microphone inputs in the cultural hall. When wiring for a remote application

wire to IN5 thru IN9, Ref and GND on CC1A, CC1B and SV2.

BLU-CIF2 / MSC-C Wiring Instructions

Some existing buildings already use Emtech

MSC-C modules to provide chapel audio for the

cultural hall and overflow areas. The BLU-CIF2

is designed to allow these existing modules to

interface with the BSS Audio DSP. Located

through the middle section of the CIF Board are

three 4-pin euro-style connectors. Each

connector has identification and wiring

designations silkscreened below it.