Specification Sheet
15
Door Configuration #5 Specification Sheet
Components & Door Thickness
Door Configuration #5
Euro Cylinder
Below Handle
3 ⁄" Center to Center
Keyed Plates with Euro Cylinder
Standard Components:
•2⁄” Euro Cylinder
•3¾” Steel Spindle
•2”RosetteScrews
Standard Components:
•1⁄” Euro Half-Cylinder
•3¾” Steel Spindle
•2”RosetteScrews
Extended Components:
•3⁄” Euro Cylinder
•3¾” Steel Spindle
•2”RosetteScrews
Extended Components:
•1⁄” Euro Half-Cylinder
•4½” Steel Spindle
•2”RosetteScrews
Extended Components:
•3⁄” Euro Cylinder
•4½” Steel Spindle
•2½” Rosette Screws
Extended Components:
•2⁄” Euro Half-Cylinder
•4½” Steel Spindle
•2½” Rosette Screws
Non-Keyed Plates with Euro-Style Half-Cylinder
Non-Keyed Plates
Includes non-keyed passage, fixed handle out/operating handle in, & dummy (uses screws only)
Standard Door Thickness: 1⁄”- 1¾”
Standard Door Thickness: 1⁄”- 1¾”
Extended Door Thickness: 1⁄”- 2¼”
Extended Door Thickness: 1⁄”- 2¼”
Extended Door Thickness: 2⁄”- 2¾”
Extended Door Thickness: 2⁄”- 2¾”
CONSTRUCTION KEYING
Charge for Construction Keying - $4.00 per Cylinder (List)
•Locks that are both construction keyed and keyed alike in a house group will be charged a total of $8.00 (list) per cylinder.
Charge for Re-Keying - $4.00 per Cylinder (List)
•Locks that are keyed to code or keyed alike in a house group will be charged $4.00 (list) per cylinder.
Keying to Code
• Order by indicating “ Key Code XXXXX “ next to applicable locks.
Keying Alike
• Order by indicating “ Keyed Alike” next to applicable locks if only one keyed alike group is wanted.
• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.
Construction devices used on
one or all of last four positions.
Dimples drilled in plug in
this position.
•Lostballsystem.
•Lastfourpinlocationsdrilledforlostballapplication.
•Masterkeywafersusedforcodevariability.
•Constructionkeysandownerkeyssentseparately.
•Orderbyindicating
“Construction Keyed, House #_”
next to applicable locks.
Steel
Spindle
Rosette
Screws
Full Euro Cylinder
Cylinder
Screw
Full Euro Cylinder Half Euro Cylinder
CY4-ERSGL35
CY4-ERSGL32
CY4-ERSGL25 CY4-ERHLF16TT
CY4-ERHLF19TT
CY4-ERHLF21TT
Standard Components:
•3¾” Steel Spindle (half-spindle for fixed handle out/operating handle in)
•2”RosetteScrews
Extended Components:
•4½” Steel Spindle (half-spindle for fixed handle out/operating handle in)
•2½” Rosette Screws
Standard Door Thickness: 1⁄”- 2”
Extended Door Thickness: 2⁄”- 2¾”