Specification Sheet

ManualsBrandsEmtek ManualsHardwareBrass Modern Door Configuration 6 Thumbturn Multi Point Trim Lever Set with American Cylinder Below Handle

Door Configuration #6 Specification Sheet

Components & Door Thickness

Door Configuration #6 American Cylinder Below Handle 3 5/8" Center to Center

Steel

Spindle

Rosette

Screws

Cylinder Tailpiece

Keyed Plates with American Cylinder Includes non-keyed, thumbturn inside

CONSTRUCTION KEYING

Charge for Construction Keying - $4.00 per Cylinder (List)

•Locks that are both construction keyed and keyed alike in a house group will be charged a total of $8.00 (list) per cylinder.

Charge for Re-Keying - $4.00 per Cylinder (List)

•Locks that are keyed to code or keyed alike in a house group will be charged $4.00 (list) per cylinder.

Keying to Code

• Order by indicating “ Key Code XXXXX “ next to applicable locks.

Keying Alike

• Order by indicating “ Keyed Alike” next to applicable locks if only one keyed alike group is wanted.

• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.

Construction devices used on

one or all of last four positions.

Dimples drilled in plug in

this position.

•Lostballsystem.

•Lastfourpinlocationsdrilledforlostballapplication.

•Masterkeywafersusedforcodevariability.

•Constructionkeysandownerkeyssentseparately.

•Orderbyindicating“Construction Keyed, House #_”

next to applicable locks.

Standard Components:

•SingleCylinderTailpiece

•3¾” Steel Spindle

•2”RosetteScrews

Standard Components:

•SingleCylinderTailpiece

•3¾” Steel Spindle (half-spindle for fixed handle out/operating handle in)

•2”RosetteScrews

Extended Components:

•LongSingleCylinderTailpiece

•4½” Steel Spindle

•2½” Rosette Screws

Extended Components:

•LongSingleCylinderTailpiece

•4½” Steel Spindle (half-spindle for fixed handle out/operating handle in)

•2½” Rosette Screws

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, & dummy (uses screws only)

Standard Door Thickness: 1⁄”- 2 ⁄” Inclusive

Extended Door Thickness: 2⁄”- 2¾”