Installation Guide

Towel Bar Installation Instructions

Mark three hole locations for each

mounting plate.

18”, 24” or 30”

Make two marks on wall to locate center of mounting

plates. Center to center spacing for mounting plates is the

same as the length of the towel bar.

1 2

Use a screw driver to install three Screw Anchors

into the wall for each mounting plate. Install

mounting plates on top of the Screw Anchors.

Attach with the sheet metal screws provided.

3 4

Slip trim plates and towel bar posts over the

mounting plate stud. Tighten set screw at

the base of each towel bar post with the allen

wrench provided.

Shape of trim

plate varies

depending on

style.

IN4-TOWELBAR REV. 11/16/04

Screw

Anchors

Installed Screw

Anchors