Installation Guide

Hole Template
Knocker Installation
Knocker Installation
Tighten Screws
Installation Instructions-Door Knocker - Urn Style - 2620
IN4-DOORKNKR1 REV. 12/20/06
5/16” Drill Bit
Countersunk Washers
Hole Template
5/16” Drill Hole
Install Thru Bolts
Thread Thru Bolts (Provided)
onto Knocker Set Screws. Use
Pliers to Ensure that Bolts are
Secure.
Thru Bolts
Set Screws
4-3/8”
Drill Holes In Door
Using Hole Template (Bottom of
This Page) Drill Two Holes with a
5/16” Drill Bit.
Emtek Products, Inc.
5/16” Drill Hole
4-3/8”