Specification Sheet

24
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: [phone] Fax: [phone] www.emtek.com
Standard Door Thickness: 1¾”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 ½” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Door Thickness: 1 7/8”- 2 ¼”
Extended Components:
• 1 ½” Threaded Cylinder
• 2” Long Spindle
• 2 ½” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”
Extended Components:
• 1 ¾” Threaded Cylinder
• 2 ¼” Long Spindle
• 2 ½” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
•
2 ¾” TD Reqires 2” Threaded Cylinder
Door Thickness Specifications
Entrance Handlesets - Wrought Steel Sectional Mortise
Same dimensions for dummy function
Same dimensions for dummy functionSame dimensions for dummy function
* Available in
Lever By Lever/
Knob by Knob
Mortise Entrance
Handlesets.
Same dimensions
as interior trim of
standard mortise
entrance
handlesets.
Lafayette Grip
Part # 3314
17”
1
3
⁄4”
3
1
⁄2”
2
1
⁄2”
2
9
⁄16”
4
3
⁄8”
1
3
⁄4”
3
5
⁄8”
2
5
⁄16”
3
3
⁄4”
2
1
⁄8”
3”
Additional Dimensions: (Part # 3315)
• Exterior Projection is 3½”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: ¾”
• Clearance between door & grip is 2”
• Plates thickness: ½”
Standard interior trim
Part # 3314/3315/3316*
San Carlos Grip
Part # 3315
9
5
⁄8”
1
3
⁄4”
Normandy Grip
Part # 3316
Additional Dimensions: (Part # 3314)
• Exterior Projection is 31⁄8”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 1½”
• Clearance between door & grip is 1¼”
• Plates thickness: ½”
Additional Dimensions: (Part # 3316)
• Exterior Projection is 3”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 1”
• Clearance between door & grip is 15⁄8”
• Plates thickness: ½”