Specification Sheet
16
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 1¾”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 ½” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Door Thickness: 1 7/8”- 2 ¼”
Extended Components:
• 1 ½” Threaded Cylinder
• 2” Long Spindle
• 2 ½” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”
Extended Components:
• 1 ¾” Threaded Cylinder
• 2 ¼” Long Spindle
• 2 ½” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
•
2 ¾” TD Reqires 2” Threaded Cylinder
Door Thickness Specifications
Sonoma Entryset
Part # 3329
2
1
⁄4”
10”
2
13
⁄16”
2
3
⁄16”
2
3
⁄4”
Longmont Entryset
Part # 3330
2
13
⁄16”
10”
2
13
⁄16”
3
7
⁄16”
4
5
⁄16”
Order any Sandcast Bronze
knob or lever for the inside trim.
Additional Dimensions: (Part # 3329 & 3330)
• Exterior Projection is 3
1
⁄8”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 1
3
⁄4”
• Clearance between door & grip is 1
3
⁄4”
• Plates thickness:
1
⁄2”
Standard with Mortise Locks
• 2 ½” or 2 ¾” backsets
• Standard Mortise Door Prep ANSI A115.1
• Schlage C Keyway
Entrance Handlesets - Sandcast Bronze Sonoma & Longmont Mortise
17
1
⁄2”
19”
Same dimensions for dummy function
2
1
⁄4”