Installation Guide

Re-pinning Cylinder (Optional)

Step 2. Rotate key counterclockwise 90º while pressing wire into hole.

Step 3. Slide knob oﬀ stem.

For more information

on rekeying cylinder,

please scan the QR

code for how-to video.

Step 1. Small hole should face down.

Key in Knob Lock Installation Guide

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and

convenience.

without the express written permission of Emtek Products, Inc. is prohibited.

PAGE 1
Re-pinning Cylinder (Optional) Step 1. Small hole should face down. For more information on rekeying cylinder, please scan the QR code for how-to video. Step 2. Rotate key counterclockwise 90º while pressing wire into hole. Step 3. Slide knob off stem. ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience. Copyright © 2013, Emtek Products, Inc. an ASSA ABLOY Group company. All rights reserved.
PAGE 2
Installation Guide - For Key in Knob Lock Lock Assembly IMPORTANT! CHECK LATCH HUB POSITION BEFORE INSTALLING Flat spindle MUST be in horizontal position for installation Outside Trim 1. Adjust and Install Latch Step 1. Adjusting for appropriate backset. Plastic Latch Pin 23/8” Backset Correct Hub Position 23/8” Backset Wrong Hub Position Plastic Latch Pin ! The Adjustable Latch is factory shipped with a 2-3/4” backset position.