Installation Sheet
1. Door Prep
Installation Guide - Back To Back Door Pulls
2. Screw Installation
From the inside, install and tighten Bevel Head Machine
Screws to outside grip with at blade screw driver.
IN4-BACKTOBACK REV. 02-02-2017
(2x) 1/4” Dia.
Hole Thru.
3. Mounting Inside Grip to Door
Mount inside grip on to Bevel Head Machine
Screws.
Tighten set screws (2 places) on inside grip. Secure to
door with hex wrench (provided).
X
X= 8”
12”
15”
Choose hole distance
for your specic grip.
Inside Trim
Set screw
on bottom.
Set screw
on bottom.
18”