Installation Guide

Page 14 of 67 pages
Document # E.0015.16.03 406984
3 Programming Procedure
3.1 General
The functions performed by the Installer are implemented by means
of the four keys at the top of the Control Panel and the numeric
keypad.
These functions are viewed from the Installer Menu, accessible from
the Main Menu.
3.2 Installer Programming Functions
To access the Main Menu, press OK at top of Control Panel when
system is disarmed and opening screen is displayed. Screen will
show:
MAIN MENU
1: USER
From this menu, press DOWN key at top of Control Panel to access
the Installer menu. Screen will show:
MAIN MENU
3: INSTALLER
Press OK at top of Control Panel. An ENTER ID prompt will be
displayed and an "Enter ID" voice prompt will sound. Enter your
Installer ID.
Note
: The Installer functions can only be implemented by the system
installer. If an ordinary User or Master ID or an incorrect code is
entered for any Installer function, an INCORRECT ID prompt will be
displayed and an "Incorrect ID" voice prompt will sound. After 1
second, an ENTER ID prompt will be displayed and an "Enter ID"
voice prompt will sound. (After three incorrect ID entries, the system
will respond with an INCORRECT ID prompt and an "Incorrect ID"
voice message, followed by an ACCESS DENIED prompt and an
"Access Denied" voice message, and access to the system from the
Control Panel will be denied for a preprogrammed interval of time.)