Installation Guide

Page 17 of 67 pages
Document # E.0015.16.03 406984
01: ZONE LABEL
FRONT DOOR ‡
To select zone label for this zone (Note: a list of zone labels appears
in the Appendix to this manual), press DOWN or UP keys at top of
Control Panel until desired zone label is displayed, and then press
OK at top of Control Panel. Now press ESC key at top of Control
Panel twice to return to Zone Programming menu and press DOWN
key to proceed to next sub-function (unless a custom label is desired
for this zone).
If a custom label is desired for this zone
, press ESC key at top of
Control Panel once, and press DOWN key at top of Control Panel.
Screen will show:
02: CUSTOM LABEL
FRONT DOOR ↵
Press OK at top of Control Panel. The "F" in FRONT will blink. Using
the numeric keypad like a cellular telephone keypad, change the "F"
to the desired letter. The "R" will then blink. Repeat until the entire
desired custom label has been keyed in. (To skip a letter, press
DOWN key.) Now press OK at top of Control Panel. Now press ESC
key at top of Control Panel to return to Zone Labels menu and press
DOWN key to proceed to next sub-function: Zone Attributes
.
Screen will show:
ZONE PROGRAMMING
3. Zn. Attributes
Press OK at top of Control Panel. Screen will show:
ENTER ZONE # 1
FRONT DOOR
To select zone attributes for this zone, press OK at top of Control
Panel. Screen will show:
01: CHIME ENABLE
Enable ↵