Installation Guide

Page 24 of 67 pages
Document # E.0015.16.03 406984
If 1 is the correct sensor serial number for this zone, press DOWN
key at top of Control Panel to proceed to next sub-function.
To change the sensor serial number
, press OK at top of Control
Panel. Using the numeric keypad like a cellular telephone keypad,
change the "1" to the desired sequence of digits. When the
sequence is complete, press DOWN key at top of Control Panel to
proceed to next sub-function.
Screen will show:
03: SENSOR OPER.
Operation A ↵
If Operation A is the correct setting for this zone, press ESC key at
top of Control Panel twice to return to Zone Programming menu and
press DOWN key at top of Control Panel to proceed to next sub-
function.
To change the sensor operation type, press OK at top of Control
Panel. The ↵ character will be replaced by ‡. Screen will show:
03: SENSOR OPER.
*Operation A ‡
To select sensor operation type for this zone (Note: a list of sensor
operation types appears in the Appendix to this manual), press
DOWN or UP keys at top of Control Panel until desired sensor
operation type is displayed, and then press ESC key at top of
Control Panel to return to PU Attributes menu and press DOWN key
at top of Control Panel to proceed to next sub-function: Zone Voice
Messages.
Screen will show:
ZONE PROGRAMMING
6. Zn. Voice Msgs.
Press OK at top of Control Panel. Screen will show:
ENTER ZONE # 1
FRONT DOOR
Press OK at top of Control Panel. Screen will show: