Installation Guide

Page 25 of 67 pages
Document # E.0015.16.03 406984
01: ALARM MSG.
Disable ↵
To disable the "alarm" voice message function and proceed to the
next voice message, press DOWN key at top of Control Panel. To
change the default from Disable to Enable, press OK at top of
Control Panel (if Enable is displayed, press OK at top of panel to
change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
02: TAMPER MSG.
Disable ↵
To disable the "tamper" voice message function and proceed to the
next voice message, press DOWN key at top of Control Panel. To
change the default from Disable to Enable, press OK at top of
Control Panel (if Enable is displayed, press OK at top of panel to
change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
03: TROUBLE MSG.
Disable ↵
To disable the "trouble" voice message function and proceed to the
next voice message, press DOWN key at top of Control Panel. To
change the default from Disable to Enable, press OK at top of
Control Panel (if Enable is displayed, press OK at top of panel to
change to Disable) and then press ESC key at top of Control Panel
three times to return to the Zone Options menu and press DOWN
key at top of Control Panel to proceed to the Timers & Counter
menu.
3.2.2 Timers & Counter
From the Zone Options menu as shown in Section 3.2.1 above,
press DOWN key at top of Control Panel. Screen will show:
INSTALLER MENU
2: Timers & Counter
To define the entry and exit delays for the system, press OK at top of
Control Panel. Screen will show: