Installation Guide

Page 28 of 67 pages
Document # E.0015.16.03 406984
Press OK at top of Control Panel. Screen will show:
01: INV. ATTEMPTS
3 ↵
If 3 is the correct number of invalid attempts allowed before keypad
locks, press DOWN key at top of Control Panel to proceed to next
sub-function.
To change the number of invalid attempts
, press OK at top of
Control Panel. The "3" will blink. Using the numeric keypad like a
cellular telephone keypad, change the "3" to the desired digit or
series of digits. Now press DOWN key at top of Control Panel to
proceed to next sub-function.
Screen will show:
02: LOCKOUT DUR.
30 seconds ↵
If 30 seconds is the correct setting for lockout duration, press
DOWN key at top of Control Panel to proceed to next sub-function.
To change the lockout duration
, press OK at top of Control Panel.
The "3" in 30 will blink. Using the numeric keypad like a cellular
telephone keypad, change the "3" to the desired digit. The "0" will
then blink. Change the "0" to the desired digit. Now press ESC key
at top of Control Panel twice to return to the Timers & Counter
menu. Now press DOWN key at top of Control Panel to proceed to
the System Options menu.
3.2.3 System Options
From the Timers & Counter menu as shown in Section 3.2.2 above,
press DOWN key at top of Control Panel. Screen will show:
INSTALLER MENU
3: SYSTEM OPTIONS
To define the arming options for the system, press OK at top of
Control Panel. Screen will show:
SYSTEM OPTIONS
1. Arming Opt.