Installation Guide

Page 29 of 67 pages
Document # E.0015.16.03 406984
Press OK at top of Control Panel. Screen will show:
01: QUICK ARM
Disable ↵
To disable the Quick Arm option and proceed to the next arming
option, press DOWN key at top of Control Panel. To change the
default from Disable to Enable, press OK at top of Control Panel (if
Enable is displayed, press OK at top of panel to change to Disable)
and then press DOWN key at top of Control Panel to proceed to
next sub-function. Screen will show:
02: FORCE ARM
Disable ↵
To disable the Force Arm option and proceed to the next arming
option, press DOWN key at top of Control Panel. To change the
default from Disable to Enable, press OK at top of Control Panel (if
Enable is displayed, press OK at top of panel to change to Disable)
and then press DOWN key at top of Control Panel to proceed to
next sub-function. Screen will show:
03: AUTO BYPASS
Disable ↵
To disable the Auto Bypass option and proceed to the next arming
option, press DOWN key at top of Control Panel. To change the
default from Disable to Enable, press OK at top of Control Panel (if
Enable is displayed, press OK at top of panel to change to Disable)
and then press DOWN key at top of Control Panel to proceed to
next sub-function. Screen will show:
04: EXIT WARNING
Enable ↵
To enable the Exit Warning option and proceed to the next arming
option, press DOWN key at top of Control Panel. To change the
default from Enable to Disable, press OK at top of Control Panel (if
Disable is displayed, press OK at top of panel to change to Enable)
and then press DOWN key at top of Control Panel to proceed to
next sub-function. Screen will show: