Installation Guide

Page 30 of 67 pages
Document # E.0015.16.03 406984
05: BELL SQUAWK
Enable ↵
To enable the Bell Squawk option and proceed to the next arming
option, press DOWN key at top of Control Panel. To change the
default from Enable to Disable, press OK at top of Control Panel (if
Disable is displayed, press OK at top of panel to change to Enable)
and then press DOWN key at top of Control Panel to proceed to
next sub-function. Screen will show:
06: RESTART EXIT
Enable ↵
To enable the Restart Exit option and proceed to the next arming
option, press DOWN key at top of Control Panel. To change the
default from Enable to Disable, press OK at top of Control Panel (if
Disable is displayed, press OK at top of panel to change to Enable)
and then press DOWN key at top of Control Panel to proceed to
next sub-function. Screen will show:
07: LATCHKEY DSRM
Enable ↵
To enable the Latchkey Disarm option and proceed to the next
arming option, press DOWN key at top of Control Panel. To change
the default from Enable to Disable, press OK at top of Control Panel
(if Disable is displayed, press OK at top of panel to change to
Enable) and then press DOWN key at top of Control Panel to
proceed to next sub-function. Screen will show:
08: SHOW ABORTED
Disable ↵
To disable the Show Aborted Arming option and proceed to the next
arming option, press DOWN key at top of Control Panel. To change
the default from Disable to Enable, press OK at top of Control Panel
(if Enable is displayed, press OK at top of panel to change to
Disable) and then press DOWN key at top of Control Panel to
proceed to next sub-function. Screen will show:
09: SHOW CANCELED
Disable ↵