Installation Guide

Page 31 of 67 pages
Document # E.0015.16.03 406984
To disable the Show Canceled Arming option and proceed to the
next arming option, press DOWN key at top of Control Panel. To
change the default from Disable to Enable, press OK at top of
Control Panel (if Enable is displayed, press OK at top of panel to
change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
10: RTC DISPLAY
Enable ↵
To enable the Real Time Clock display option and proceed to the
next arming option, press DOWN key at top of Control Panel. To
change the default from Enable to Disable, press OK at top of
Control Panel (if Disable is displayed, press OK at top of panel to
change to Enable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
11: TROUBLE BEEPS
No ↵
If no trouble beeps are desired, press DOWN key at top of Control
Panel to proceed to next sub-function.
To determine a different trouble beep option, press OK at top of
Control Panel. The ↵ character will be replaced by ‡. Screen will
show:
11: TROUBLE BEEPS
*No ‡
To select trouble beep option for this zone (Note: a list of trouble
beep options appears in the Appendix to this manual), press DOWN
or UP keys at top of Control Panel until desired strobe type is
displayed, and then press DOWN key at top of Control Panel to
proceed to next sub-function.
Screen will show:
12: CROSS ZONE
Disable ↵
To disable the Cross Zone arming option and proceed to the next
arming option, press DOWN key at top of Control Panel. To change