Installation Guide

Page 41 of 67 pages
Document # E.0015.16.03 406984
hexadecimal house code (1-9 or A-E) and press OK at top of Control
Panel. Screen will show:
X-10 No: 1
APPLIANCE 1
To confirm 1 as the current appliance number, press OK at top of
Control Panel. Screen will show:
01: APPL. LABEL
Appliance 1 ↵
If Appliance 1 is the correct name for this appliance, press DOWN
key at top of Control Panel to proceed to next sub-function.
To change the appliance name, press OK at top of Control Panel.
The ↵ character will be replaced by ‡. Screen will show:
02: APPL. LABEL
* Appliance 1 ‡
To select appliance name for this appliance (Note: a list of appliance
names appears in the Appendix to this manual), press DOWN or UP
keys at top of Control Panel until desired appliance name is
displayed, and then press DOWN key at top of Control Panel to
proceed to next sub-function. Screen will show:
03: DEVICE CODE
1 ↵
If 1 is the correct device code, press DOWN key at top of Control
Panel to proceed to next sub-function.
To change the device code
, press OK at top of Control Panel. The
"1" will blink. Using the numeric keypad like a cellular telephone
keypad, change the "1" to the desired digit or series of digits. Now
press DOWN key at top of Control Panel to proceed to next sub-
function.
Screen will show:
04: ON BY ARMING
Disable ↵