Installation Guide

Page 42 of 67 pages
Document # E.0015.16.03 406984
To disable the "turn appliance on by arming" function and proceed to
the next X-10 device option, press DOWN key at top of Control
Panel. To change the default from Disable to Enable, press OK at
top of Control Panel (if Enable is displayed, press OK at top of panel
to change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
05: ON BY DELAY
Disable ↵
To disable the "turn appliance on by delay" function and proceed to
the next X-10 device option, press DOWN key at top of Control
Panel. To change the default from Disable to Enable, press OK at
top of Control Panel (if Enable is displayed, press OK at top of panel
to change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
06: ON BY KEYFOB
Disable ↵
To disable the "turn appliance on by keyfob" function and proceed to
the next X-10 device option, press DOWN key at top of Control
Panel. To change the default from Disable to Enable, press OK at
top of Control Panel (if Enable is displayed, press OK at top of panel
to change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
07: ON BY TIMER
Disable ↵
To disable the "turn appliance on by timer" function and proceed to
the next X-10 device option, press DOWN key at top of Control
Panel. To change the default from Disable to Enable, press OK at
top of Control Panel (if Enable is displayed, press OK at top of panel
to change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
08: START TIME
00:00 A
If 00:00 AM is the correct start time, press DOWN key at top of
Control Panel to proceed to next sub-function.