Installation Guide

Page 45 of 67 pages
Document # E.0015.16.03 406984
Repeat for the remaining digits. If necessary, add a digit or series of
digits in order to complete the telephone number. Now press DOWN
key at top of Control Panel to proceed to next sub-function.
Screen will show:
03: 1ST REPORT FORMAT
CONTACT ID ↵
If Contact ID is the correct first report format, press DOWN key at
top of Control Panel to proceed to next sub-function.
To change the first report format, press OK at top of Control Panel.
The ↵ character will be replaced by ‡. Screen will show:
03: 1ST REPORT FORMAT
*CONTACT ID ‡
To select the first report format (Note: a list of report formats appears
in the Appendix to this manual), press DOWN or UP keys at top of
Control Panel until desired report format is displayed, and then
press OK at top of Control Panel to proceed to next sub-function.
Screen will show:
04: 1ST REPORT ->CS
All Events ↵
If All Events is the correct option for transmission of the first report to
the Central Station, press DOWN key at top of Control Panel to
proceed to next sub-function.
To change the option for transmission of the first report to the
Central Station, press OK at top of Control Panel. The ↵ character
will be replaced by ‡. Screen will show:
04: 1ST REPORT ->CS
*All Events ‡
To select the default option for transmission of the first report to the
Central Station (Note: a list of report default options appears in the
Appendix to this manual), press DOWN or UP keys at top of Control
Panel until desired report default option is displayed.