Installation Guide

Page 51 of 67 pages
Document # E.0015.16.03 406984
Screen will show:
12: TEL LINE TEST
Test None ↵
If Test None is the correct line test schedule, press DOWN key at
top of Control Panel to proceed to next sub-function.
To change the line test schedule, press OK at top of Control Panel.
The ↵ character will be replaced by ‡. Screen will show:
12: TEL LINE TEST
*Test None ‡
To select the default period for telephone line testing (Note: a list of
period options appears in the Appendix to this manual), press
DOWN or UP keys at top of Control Panel until desired period option
is displayed, and then press OK at top of Control Panel to proceed
to next sub-function. Screen will show:
13: TEST TIME
00:00 ↵
If 00:00 is the correct test time, press DOWN key at top of Control
Panel to proceed to next sub-function.
To change the test time, press OK at top of Control Panel. The ↵
character will be replaced by ‡. Screen will show:
13: TEST TIME
00:00 ‡
To change the test time, press OK at top of Control Panel. The first
"0" will blink. Using the numeric keypad like a cellular telephone
keypad, change the "0" to the desired digit. The next "0" will then
blink. Change the "0" to the desired digit. Now do the same for the
third "0" and the fourth "0", to set the test time in 24-hour format
.
Now press DOWN key at top of Control Panel to proceed to next
sub-function.
Screen will show: