Installation Guide

Page 52 of 67 pages
Document # E.0015.16.03 406984
14: TEST DAY
Monday ↵
If Monday is the correct test day, press DOWN key at top of Control
Panel to proceed to next sub-function.
To change the test day, press OK at top of Control Panel. The ↵
character will be replaced by ‡. Screen will show:
14: TEST DAY
*Monday ‡
To select the default day of the week for telephone line testing, press
DOWN or UP keys at top of Control Panel until desired period option
is displayed.
On conclusion of all sub-functions (when sub-function 01 is again
displayed), press ESC to return to Communicator menu. Now press
DOWN key at top of Control Panel to proceed to the Download
Options menu. Screen will show:
COMMUNICATIONS
4. Download Opt.
Press OK at top of Control Panel. Screen will show:
01: DOWNLOAD
Enable ↵
Note: These functions are discussed in Section 3.2.9 below.
On conclusion of all sub-functions (when sub-function 01 is again
displayed), press ESC to return to Communications Options menu.
Now press DOWN key at top of Control Panel to proceed to the
Report Codes menu.
3.2.8 Report Codes
From the Communications Options menu as shown in Section 3.2.7
above, press DOWN key at top of Control Panel. Screen will show:
INSTALLER MENU
8: REPORT CODES