Installation Guide

Page 65 of 67 pages
Document # E.0015.16.03 406984
OTHERS MENU
2: FACTORY DEF.
Use this option to review factory definitions. On conclusion of review,
press ESC at top of Control Panel to return to the above screen and
press DOWN key at top of Control Panel, to reach the next sub-
option, Diagnostics
.
Screen will show:
OTHERS MENU
3: DIAGNOSTICS
Press OK at top of Control Panel. Screen will show:
TEST MENU
1. ZONE TEST
Perform this test and the remaining diagnostic tests (BUZZER
SOUND, SIREN SOUND, LEDS TEST, SOUND MSGS.).
On conclusion of all sub-functions (when sub-function 01 is again
displayed), press ESC to return to Arming Options menu and press
DOWN key to proceed to next sub-function: Debug Info
.
Screen will show:
OTHERS MENU
4: DEBUG INFO
Press OK at top of Control Panel. Screen will show:
01: BATTERY TEST
Disable ↵
To disable the battery test function and proceed to the next debug
info option, press DOWN key at top of Control Panel. To change the
default from Disable to Enable, press OK at top of Control Panel (if
Enable is displayed, press OK at top of panel to change to Disable)
and then press DOWN key at top of Control Panel to proceed to
next sub-function. Screen will show:
02: PRINT RF INFO
Disable ↵