Installation Guide

Page 66 of 67 pages
Document # E.0015.16.03 406984
To disable printing of RF info and proceed to the next debug info
option, press DOWN key at top of Control Panel. To change the
default from Disable to Enable, press OK at top of Control Panel (if
Enable is displayed, press OK at top of panel to change to Disable)
and then press DOWN key at top of Control Panel to proceed to
next sub-function. Screen will show:
03: SEND RF CMND
Disable ↵
To disable the Send RF Command function and proceed to the next
debug info option, press DOWN key at top of Control Panel. To
change the default from Disable to Enable, press OK at top of
Control Panel (if Enable is displayed, press OK at top of panel to
change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
04: RF ALWAYS OK
Disable ↵
To disable the RF Always OK function and proceed to the next
debug info option, press DOWN key at top of Control Panel. To
change the default from Disable to Enable, press OK at top of
Control Panel (if Enable is displayed, press OK at top of panel to
change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
05: RF SIMULATOR
Enable ↵
To enable the RF simulator function and proceed to the next debug
info option, press DOWN key at top of Control Panel. To change the
default from Enable to Disable, press OK at top of Control Panel (if
Disable is displayed, press OK at top of panel to change to Enable)
and then press DOWN key at top of Control Panel to proceed to
next sub-function. Screen will show:
06: KPD PHONE DIAL
Disable ↵
To disable the Keypad Phone Dial function, press DOWN key at top
of Control Panel. To change the default from Disable to Enable,