User's Guide

Page 29 of 46
Document # E.0015.16.02 406985
3.5.1 Bypass
This function is used to bypass any alarm zone whose activation is not
desired, and to clear any bypass that has already been set.
After the User ID has been entered from the User Menu, screen will
show:
USER MENU
1. ZONE BYPASS
Press OK.
To set a bypass
, press OK. Screen will show:
ZONE 1 No Bypass
FRONT DOOR
Use arrow keys at top of Control Panel to scroll to the desired zone
number, or
use numeric keypad at center of Control Panel to enter
desired zone number, and press OK. If bypass is successful, screen will
show:
ZONE 1 Bypass
FRONT DOOR
and a "Zone bypassed" voice prompt will sound.
If bypass is unsuccessful, screen will display:
Zone 1 Bypass
FAILED
Press OK to confirm. Screen will now again show:
ZONE 1 No Bypass
FRONT DOOR
Repeat until all desired bypasses have been set.
To clear a bypass
, use arrow keys at top of Control Panel to scroll to the
desired zone number, or use numeric keypad at center of Control Panel