User's Guide

Page 30 of 46
Document # E.0015.16.02 406985
to enter desired zone number, and press OK. If bypass clearing is
successful, screen will show:
ZONE 1 No Bypass
FRONT DOOR
and a "Zone not bypassed" voice prompt will sound.
If bypass clearing is unsuccessful, screen will display:
Zone 1 Unbypass
FAILED
Press OK to confirm. Screen will now again show:
ZONE 1 Bypass
FRONT DOOR
Repeat until all desired bypasses have been cleared.
To leave the Bypass function, press ESC.
3.5.2 View Troubles
To view a history of trouble (malfunction) and miscellaneous events (low
battery alerts for sensors, etc.), use arrow keys at top of Control Panel to
scroll through User functions on the User Menu to the View Troubles
function. Screen will show:
USER MENU
1. ZONE BYPASS
Press OK. If there is no trouble history, screen will show:
NO TROUBLES
If there is a trouble history, screen will show the most recent trouble
incident with the date and type of trouble. If the trouble applies to a
specific zone, the zone number will also be designated.
Use DOWN arrow key at top of Control Panel to scroll through trouble
events.