User's Guide

Page 43 of 46
Document # E.0015.16.02 406985
Use numeric keypad at center of Control Panel to adjust user code and
press OK, or simply press OK to confirm user code. Repeat for users 2-6,
pressing OK each time. When all user codes have been confirmed or
adjusted, press ESC. The ACCESS CODES screen will again be
displayed.
To confirm or adjust special codes (one-time codes, duress code, phone
code), press DOWN arrow key until screen shows:
ACCESS CODES
3. Misc. Codes
Press OK. Screen will show:
01: 1st ONE TIME CODE
1111
Use numeric keypad at center of Control Panel to adjust user code and
press OK, or simply press OK to confirm user code. Repeat for second
one-time code, duress code and phone code, pressing OK each time.
To leave the Access Codes function, press ESC.
3.6.4 Arm Options
This function is used to set Auto Arm, Auto Disarm, Quick Arm, Force Arm
and Latchkey Disarm functions.
From the Master Menu, use arrow keys at top of Control Panel to scroll to
the Arm Options function. Screen will show:
MASTER MENU
4. Arm Options
Press OK. Screen will show:
01: AUTO ARM
00:00 A
Use numeric keypad at center of Control Panel to adjust auto arm time
and press OK. (If auto arm is not desired, simply press OK). Screen will
show: