User's Guide
Page 6 of 46
Document # E.0015.16.02 406985
• Message exchange: Short verbal messages may be
recorded by any user. On arrival, each user can
automatically receive any messages left for him. Messages
may also be collected by remote telephone.
• Electrical device control: X-10 modules can be programmed
to control specific lights/appliances within the building.
• Remote control from control panel, keyfob or telephone:
PGM (programmable) modules can be used to control gate
mechanisms, courtesy lighting and other devices outside the
building.
• A DAA (Direct Access Arrangement) with capacitive coupling
to a DSP provide all PSTN functions including all pulse,
DTMF and FSK communication protocols. A 2400 baud fast
data transfer modem for remote programming. The DSP
includes Telephone Line Monitor (TLM) that monitors
continuously the status of the PSTN line.
• Fully programmable control panel for a wide range of
security options.
The IntegrAlarm control panel meets the following SIA standards:
• ANSI/SIA CP-01-2000 Control Panel standard – False Alarm
Reduction Feature Standard.
• SIA DC-02 Digital Communication Protocols for SIA pulse
protocols P1, P2, P3, P4, SIA DTMF protocol and SIA FSK
protocols (Level 1 and partially Level 3)
• SIA DC-05 Digital Communication – Ademco (R) Contact ID
Dialer Protocol Standard.
• SIA AV-01 Audio Verification Standard.
1.3 Wireless Specifications
Operating frequency band – ISM 902-928 MHz.
Mode of operation – frequency hopping; every data packet is transmitted
on a different pseudo random selected frequency.