Operating instructions

PRESET DEFINITION MODULE

12 - COPY/NAME VOICE

This function copies a Voice, assigns a new Voice number, and allows for renaming the

Voice. The original Voice remains intact.

Applications: To make a “back-up” copy of a Voice in the Bank before permanently altering it.

To create a modified version of an existing Voice without altering the original. To rename an

existing Voice by copying it to itself.

1. With the module active, key in 12. The display says:

Copy Voice __

(01 - 99)/Slider A

...and the ENTER light will be flashing. Either use the keypad to specify the Voice

number to be copied, or move Slider A to catalog (see GENERAL INSTRUCTIONS 7)

the Bank Voices. When the display shows the Voice to be copied, press ENTER.

2. The display now says:

Copy Voice XX

Into Voice __

...where XX is the Voice number you chose in step 1. Use the keypad to enter the copy’s

Voice number. The display will confirm your choice and the ENTER LED will start

flashing. Press ENTER to copy the Voice.

3. The display now asks:

V01*

Rename? Y/N

* or Voice to be renamed

...unless there isn’t enough memory left for the additional Voice, in which case the

display will say “Not Enough Memory”. If you don’t want to rename, press NO. To

rename, press YES (you can rename a currently existing Preset by copying it to itself).

Slider B positions the cursor under the letter you want to change, while Slider A chooses

between lower case letters, capital letters, numerals 0 - 9, #, and space (top slider

position). Continue positioning the cursor and entering letters until the name is complete.

To exit to another function, see GENERAL INSTRUCTIONS 3 (“Exiting a Function”).