Operating instructions

INTRODUCTION

11. To try out Presets from other factory disks, open the latch, remove the existing disk, and

insert another factory disk. Close the latch. Now, find the portion of the front panel labeled

“DISK” (towards the lower-right hand corner). Press its switch, and its LED will light up. Now

press 1 on the keypad. The disk drive will start making noises, and you will be on your way

to loading another bunch of sounds into the Emulator II. When the drive LED goes out,

press the DISK switch once more, then start playing the keyboard and selecting more

Presets.

* * * * *

By now you should be pretty impressed, but there’s much more to come...so keep reading, and

you’ll find out all about it.