User manual

The OneCommand Manager User Manual Page 2
• Mask and unmask FC LUNs
• Perform authentication using the Fibre Channel Security Protocol Diffie-Hellman Challenge
Handshake Authentication Protocol (FC-SP DHCHAP)
• Create and delete FC virtual ports through N_Port_ID virtualization [NPIV]
• View FC virtual ports and virtual machine mapping information
• Configure FC boot from SAN
• Modify an IP port number of the remote management agent
• View vital product data (VPD) for the selected adapter port
• View transceiver information for the selected adapter port
• View iSCSI target session information
• View vNIC data for supported adapters
• Create and save reports about discovered SAN elements
• Supports COMSTAR (COmmon Multiprotocol SCSI TARget) for OpenSolaris enabling the
Emulex FC driver for Solaris (EMLXS) to make a host appear as a target to the SAN.
(COMSTAR ports are supported on OpenSolaris with LightPulse FC HBAs only.)
Supported Features by Operating System
Not all OneCommand Manager application features are supported across all operating systems. The
following table lists the OneCommand Manager application features and their operating system support.
Table 1: Supported Features by Operating System Cross-Reference
Feature/Task Windows Solaris Linux
VMware ESX
Server
OneCommand Manager
application GUI
XXX X*
OneCommand Manager
application CLI
XXX X
OneCommand Manager
application Web Launch
Interface utility
XXX
Discover local hosts, adapters,
targets and LUNs
XXX X*
Discover remote hosts,
adapters, targets and LUNs
XXX X*
Enable local discovery of
Emulex and OEM branded
Emulex adapters
XXX X*
Enable FC discovery of
Emulex and OEM branded
Emulex adapters
XXX X*
Change an adapter’s WWPN
or WWNN
XXX X*
Reset adapters
XXX X*
Set up persistent binding
X
Simultaneously set adapter
driver parameters to multiple
adapters
XXX
Set global driver parameters to
adapters
XXX X**