Specifications

Installation
Caution Emulex LightPulse ® Host Bus Adapters (HBAs) contain
electronic components that can be damaged by static
electricity through an electrostatic discharge (ESD) event. To
prevent ESD damage, maintain constant contact with any
grounded metal surface. A grounding wrist strap is useful for
this purpose. Handle the card carefully at all times and
preferably by the edges. Avoid touching electronic
components and keep the card in the original packaging until
you are ready for installation.
Compatibility
Software EnvironmentsWindows Server 2003, Windows 2000, Windows NT,
Linux, NetWare, AIX, Solaris x86
Hardware
Environments
PCI hardware platforms: x86, SPARC, PowerPC
Prerequisites
Host computer must provide 3.3VDC bus power•
PCI/PCI−X 64−bit data and addressing with 3.3 V signaling•
PCI bus clock rate up to 66 MHz is supported•
PCI−X bus clock rate up to 133 MHz is supported•
Note The LP9402DC can only be used in a 3.3V signaling slot. 66
MHz, 64−bit PCI slots and 66/100/133 MHz, 64−bit PCI−X
slots are 3.3V signaling slots. The LP9402DC is keyed so it
cannot be installed in an incorrect slot.
Media and connectors (user supplied) − multimode fiber optic cable
(50/125 m m or 62.5/125 m m) with LC connectors, used with
short−wave lasers
•
Emulex Drivers, Software and Manuals
3