User's Manual

II. Getting started

1. Assembling the parts

1.1 IP Camera

1) Connect the antenna.

2) Hardware settings for Wireless network.

a. Check the Wired/Wireless switch for correct position (to Wireless)

b. Connect the power cable.

c. Wireless LED on the front will be turned on if the network has been connected and

properly working.

3) Hardware settings for Wired network.

a. Check the Wired/Wireless switch for correct position (to Wired).

b. Connect the LAN cable.

c. Connect the power cable.

d. Wired LED on the front will be turned on if the network has been connected and

properly working.

1.2 NVR

1) Connecting the devices

a. User must insert (slide in) the HDD, then press the power button to complete the

connection.

b. Connect the antenna.

c. Connect the power cable.

d. Connect the monitor and LAN cable.