User's Manual

16
2. Network Connection
2.1 Wireless Network
1) Connect the power to IP Camera and NVR. Please wait awhile until the booting
process is finished.
2) Push the pairing button on the front panel of NVR for more than 3 seconds to establish
the wireless network. Wait until the LED on the front panel changes from blinking red to
green.
<Caution> Pairing sequence must take place if you are connecting the IP Cameras
to NVR for the first time.
3) After finishing the wireless network setting, user must allocate the channels to the IP
Camera(s).
Find Wireless icon
on the main menu, then enter the menu to select the IP
Camera(s) from the list. User can either allocate channels to the IP Camera(s)
automatically by pushing [Auto Link] button, or allocate the channels manually.