User's Manual

2.2 Wired Network

1) Connect the power to IP Camera and NVR. Please wait awhile until the booting

process is finished.

2) Use the Network Router to connect the IP Camera(s) to NVR.

3) Move to the

Device menu and find LAN PORT SETUP menu to enter.

4) User can manually allocate channels to the IP Camera(s) on the list at LAN PORT

SETUP menu.

3. Time & Date setting for the first time

When the NVR is powered on for the very first time, the time and date are set as default to January 1

2009 Thursday 01:00:00. Before start operating the NVR, it is imperative to set the time and the date.

Move to the

system menu to enter the setting.